Pete, I need valve cover gaskets and timing cover gaskets replaced, I have the gaskets / kits for all. Price please? Thanks, David
Pete, I need valve cover gaskets and timing cover gaskets replaced, I have the gaskets / kits for all. Price please? Thanks, David
My car has 107000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Hi there. Typically when the timing cover gasket is replaced, the cover itself should be replaced as well. To receive an estimate for this service, and the valve cover gasket, please click this link and enter your vehicle information and services requested. Once we receive the data, we’ll send you a quote via email. Thanks.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
This is an N54 valve cover manufactured by Rein Automotive – an original supplier to BMW for many other engine components. As an OEM it meets all of BMW`s original design, fitment, and performance requirements and is TUV approved.
The average cost for a Valve Cover Gasket Replacement is between $585 and $718 but can vary from car to car.
Your valve cover gasket may leak because of cracks and wear and tear. These leaks will cause your engine oil to deplete rapidly. The symptoms can result in a burning smell coming from under the hood. Oil will run down your engine block and create major issues if not attended to immediately.
Silicon rubber: Silicon rubber valve cover gaskets are easy to replace, and tend to hold up better where breakage is concerned.
For this application, Permatex No. 1, RTVs or Permatex High Tack gasket sealant work well. Tip: after gluing the gasket to the cover, place the gasket on a flat surface and place a weight on top of the cover until the sealant dries.
Recommended Services. The engine valve cover gasket should last for about 8 to 12 years. If the gasket is leaking, then the PCV (Positive Crankcase Ventilation) valve is plugged up causing the engine to build up too much crankcase pressure blowing out the gasket.
Cost Of Replacing A Valve Cover Gasket
On average, it`ll cost you around $100 to $350 to replace the valve cover. You`ve to pay 30 to 50 bucks for parts and 70 to 300 dollars for labor fare.
If the gasket is worn out, it will leak engine oil and the top of the engine will be likely be covered in oil. It can also expose your engine to dirt, debris and other pollutants with the ability to cause permanent damage. You`ll need to get an immediate replacement to prevent serious damage to your engine.
Unfortunately, a valve cover gasket leak can be dangerous if it leads to spontaneous vehicle failure or overheating as you drive. While it doesn`t pose a serious risk of sudden harm otherwise, it can cause extensive internal damage to your engine and related systems, which can cost hundreds or thousands to repair.
Most vehicles have a valve cover gasket. VW and Audi models are no exception. Like any other car part, this component requires periodic replacement to ensure smooth engine performance.
If you were recommended a valve cover gasket because it was leaking, just make sure that the fastener seals are also replaced. If not, they are guaranteed to go next. As far as any other components go, if they are attached to the valve cover in any way, you should likely consider replacing those seals as well.
Flexibility, weather resistance, and electrical insulation properties make silicone rubber a very popular choice for gasket materials. Silicone maintains high performance at extreme temperatures, remaining functional between -60°F and more than +400°F.
Multi-Layer Steel
They are the most durable type of head gasket and can provide a very good seal, but are also the most difficult to install.
Gasket makers and flange sealants have tremendous reliability. They can eliminate leak paths that traditional gaskets can`t, and they`re super resistant to vibration, fluids, and temperature cycles.
Please note that RTV is not to be used on the entire gasket; the gasket should be installed clean and dry. RTV should only be used on the corners of the gasket and/or stepped casting areas that have a gap. Using a small amount of RTV will fill in those areas to assure a leak-free assembly.
When running your vehicle, the valve cover will have to do its job and keep the oil from leaking out. Most of the gaskets on your car last anywhere from 20,000 to 50,000 miles.
If the amount of oil leaking from your engine is small, you can safely drive your car with a faulty valve cover gasket until you find the time to have it repaired. But once you notice oil dripping under your parked car, there`s a significant leak and you should take your car to a mechanic as soon as possible.
Replacing the gaskets on a V-type engine is a job for the pros. But the valve cover gasket replacement cost on a four-cylinder engine is less than $25 and can be done in about an hour.
1 Answer. Roro Valdez, no it cannot. There may be some oil dripping onto the exhaust (header) and most of the smoke would be in the engine compartment. Smoke coming from the back of the exhaust pipe is caused by the combustion itself.
The valve cover gasket is a seal that is located between the BMW engine and the valve cover. This seal is important because it helps to prevent water and debris from entering the BMW engine. If this seal is damaged, it can cause several problems. For example, the engine may not start, or the engine may overheat.
The Average Cost for a Timing Cover Gasket Is Between $85 and $1,040, Depending on if You Go to the Mechanic or DIY. The price range for replacing a timing cover gasket is based on the national average for all vehicle types. It does not consider your particular vehicle`s make or model, nor include any taxes or fees.
This can manifest as a rough idle, stalling, or difficulty starting the vehicle. In severe cases, engine misfiring can lead to damage to the spark plugs, which can be costly to replace. Excessive oil consumption is also a potential sign of valve cover gasket failure.
Too much oil or a sticking PCV valve will cause the engine to build up too much crankcase pressure and blow out the valve cover seals. If you need further assistance with your leaks, then seek out a professional, such as one from Your Mechanic, to help you.
In case of cars that have a timing chain, the timing cover secures the front section of the engine block with the help of a timing cover gasket. In this way, the timing gears and chain receive lubrication with the engine oil. If the timing cover gasket breaks, you will notice engine oil leaking.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Pete, I need valve cover gaskets and timing cover gaskets replaced, I have the gaskets / kits for all. Price please? Thanks, David
ANSWER : Hi there. Typically when the timing cover gasket is replaced, the cover itself should be replaced as well. To receive an estimate for this service, and the valve cover gasket, please click this link and enter your vehicle information and services requested. Once we receive the data, we’ll send you a quote via email. Thanks.
I would like to know what parts I need to replace VVT ECCENTRIC SHAFT SENSOR and Valve cover
ANSWER : Although we would need to confirm using your VIN number, the required valve cover in your application appears to be part #: BMW-11127552281. The required BMW Eccentric Shaft Sensor (Valvetronic) is part #: VDO-S119565001Z. These OEM parts can be installed more economically for you by a mobile professional mechanic versus the cost you will see at a dealer. If you desire that these parts be replaced by a certified Mechanic, dispatched by YourMechanic right to your location, please request quotes for valve cover/gasket replacement as well as VVT sensor or solenoid replacement. Once you set up an appointment, the responding certified mechanic will get this resolved for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
Was told that I need my valve cover gasket replaced. It is the drives side 1998 Mercedes C280
ANSWER : Hi there – I believe the "gasket" you mention that is actually leaking is one of a handful of rubber grommets for the bolts that hold on the valve cover gasket. They require removal of the valve cover gasket to replace, and should be replaced at the same time as the valve cover gasket. They get hard with age and heat, and will leak in a similar time frame as the valve cover gasket. I recommend a valve cover gasket replacement by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, and replace the gasket and grommets, resolving the leak.
i have a 1994 z28 and i did a head gasket replacement for some blown head gaskets. I then tried changing the timing gears and when
ANSWER : Hi there. It really depends on the location of the motor (meaning if it’s installed in the vehicle or loose and on an engine stand), that would factor into the price and whether this is a project one of our mobile mechanics can complete. We can complete the oil pan gasket replacement, but some of the other jobs like wiring harness, intake and rocker arm installation is outside of our scope of service. In regards to estimates for those services, I would suspect it would cost anywhere from $400 to $1,000 based on where it’s completed and what supplies would be needed.
After valve cover gasket replacement, compressor broke
ANSWER : Hi there. Thanks for writing in about your 2000 Lexus GS400. Compressors can go bad due to oil saturation. It is likely that the technician spilled additional oil on the compressor when replacing the valve cover. The technician may have dealt the final blow to the already weakened compressor if they did spill such additional oil onto it. Unfortunately there is no real way to prove if this was done or not. If you need to have this taken care of, a qualified professional, such as one from YourMechanic can take a look at the car and replace the compressor if necessary.
Valve Cover Gaskets/ Transmission line fittings to the radiator, do I need them?
ANSWER : Hello. The only way to really know for sure if you need to have these repairs done would be to get a second opinion. If the valve covers are leaking then they should be repaired to prevent further issues. As for the transmission line fittings, if these are leaking at the transmission then they need to be fixed also. Most of the time that does not need anything more than tightening the hoses at the fitting to stop any leakage. If you would like to get a second opinion on these leaks, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose and repair this.
I have a 2001 Toyota Tundra 4.7 V-8. When replacing the valve cover gasket, what should I torque the valve cover back to when rein
ANSWER : The valve cover bolt is tightened to 60 inch pounds.
Is manifold gasket replacement a diehard requirement for manifold r&r?
ANSWER : The intake manifold gasket can be reused if it is not damaged in any way. The cost of the new gasket versus removing the intake again if it leaks is something to think about. Consider if it’s worth the risk to reuse it if you had to do the job twice. The manual for your Pontiac Grand Am says you can reuse it as long as it is not damaged, but I personally would not reuse it.
If you need some assistance with this, consider YourMechanic, as a certified technician can come help you with the repairs you’re making and service your intake manifold gasket as necessary. Good luck.
