My car will not turnover at all! no spark not even does it try to start up i have replaced the distributer starter spark plugs
My car has 28000 miles.
My car has a manual transmission.
A qualified technician, such as one from YourMechanic, would first test for voltage (as well as voltage drop) at the starter when you actuate the starting circuit. If no voltage, that is if the circuit is open, the break in the starting circuit is simply traced.
If there is power to the starter and yet the starter will not function, the starter is condemned and thence replaced. YourMechanic can perform these tests to properly diagnose your starting issue right at your location.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
The crankshaft position sensor monitors the position and rotational speeds of the crankshaft. Without the crank sensor, the engine control module (ECM) wouldn`t know when to fire the fuel injectors and ignite the spark plugs.
One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn`t working, the spark plugs won`t fire, keeping the engine from starting.
Dirt and Debris: Dirt, debris, or corrosion on car batteries can penetrate into the sensor causing malfunctioning. This failure can lead to a number of electrical problems including no-start.
Connected to the battery is the alternator, which works to generate power for your vehicle`s electrical components. When you have a brand-new battery but still can`t start the car, the alternator might be the issue. Cold and damp climates may increase wear on an alternator, causing it to fail.
A malfunctioning mass airflow sensor can also make it difficult to start your automobile. This can be due to the air and fuel in balance in the combustion chamber or because the main computer chip has received an error code from the sensor and does not want to start your car.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
A qualified technician, such as one from YourMechanic, would first test for voltage (as well as voltage drop) at the starter when you actuate the starting circuit. If no voltage, that is if the circuit is open, the break in the starting circuit is simply traced.
If there is power to the starter and yet the starter will not function, the starter is condemned and thence replaced. YourMechanic can perform these tests to properly diagnose your starting issue right at your location.
Looks like you’re chasing an electrical gremlin here. First, the brand of spark plug may in some cases cause issues with starting. However, beyond brand is making sure it’s the right model and has the correct gap is more critical. The fact that you’re trying to start the car with throttle cleaner is a red flag. This method used to work really well with older, carburetor fueled systems, but with today’s fuel injected systems that are monitored by ECU’s, that typically causes a huge overload of energy, can fry the sensors and put you back to square one.
My advice here is to contact a certified mechanic and have them diagnose the starting problem you’re having, as by trying to fix it, the problems with the Grand Am may have gotten worse unfortunately.
If you recently replaced your battery, the issue may be caused by a malfunctioning alternator or other electrical component that comprises the charging system on your Nissan Sentra. The best way to find out which item specifically is faulty, is to have a professional mobile mechanic complete a car is hard to start inspection. This will allow the mechanic to determine the precise source of what’s going on with your Sentra and recommend or complete the right repairs.