Interior lights work but car won’t start and power locks won’t work 97 Honda passport

I went to turn my car on to head home from work today and when I turned the ignition the car would not start. It makes no clicking noise when trying to start. My interior lights were working but when exiting the car I pushed my power lock button to lock the car and they would not go down but I could hear them trying and I had to lock them manually.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
You possibly have a dead battery. Batteries that are "partly" dead can often still run lights, dash lights and so forth but will not have enough power to run the starter motor and start the car. The very first thing to do is be sure you have a fully, 100% charged battery that passes a load test. If the battery passes a load test be sure it is NOT a marginal pass in which case you should simply install a new battery to reduce diagnostic headaches. Batteries are a VERY important component in a car’s electrical system. Once you have a fully functioning, preferably new battery (fully charged before you leave the store), if the starting system still does not function, there are only a relatively limited number of causes. Broadly, either the starter motor/solenoid assembly is faulty or the electrical circuit supplying the motor has a fault. That circuit begins at the battery and includes grounds, wiring (some of which is very heavy cabling), fuses, relays, the ignition switch and terminations. Basically, the starter is either getting power or it isn’t. If the starter motor is getting power but it doesn’t work, the starter is condemned and replaced. Alternatively, if there is no power to the starter, then the starter circuit is traced until the fault in the circuit is found. Notably, faults can include high resistances, due to corrosion, wire strand breaks, or loose terminals, which can only be diagnosed using a voltage drop test. If you desire that a certified mechanic resolve this promptly, please simply request a no start diagnostic and the responding mechanic will get it diagnosed and repaired for you, including installing a new battery if required. Please let us know if you have further concerns or questions as we are always here to help you.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

You possibly have a dead battery. Batteries that are “partly” dead can often still run lights, dash lights and so forth but will not have enough power to run the starter motor and start the car. The very first thing to do is be sure you have a fully, 100% charged battery that passes a load test.
Flat or faulty car battery

A flat battery is the most common reason your car won`t start and can be caused by a number of things, such as lights being left on, something in the electrical system causing a battery drain, or even a faulty battery that won`t hold its charge.

Check the battery if there is a slow crank and a clicking sound, and the car engine won`t start. However, if the check engine light illuminates, the issue could be the engine or fuel pump. If your vehicle doesn`t start, call AAA, roadside service, or another towing company to take your car to get it repaired.
The most common causes of no-start conditions are the battery, starter, battery cable, ignition switch, or the fuel pump. Any of these can be intermittent issues, which will not always act up. Given that you have had success with shaking the battery cables, this may indicate that one of the cables is failing.
When all your dashboard lights turn on at once, it most commonly indicates an issue with the alternator or the charging system. It is common for all the dash lights to come on with no alternator output; low voltage can cause unusual electrical issues. The alternator should be tested at the time of battery replacement.
The battery can be fully charged but still not be able to start the vehicle if it is failing or has a dead cell. Other likely issues are the fuel pump, ignition switch, battery cables, starter, or a clogged fuel filter.
Engine warning light

Illuminates when the ignition is switched on. It should extinguish as soon as the engine starts. If it illuminates with the engine running, it indicates a malfunction with the engine management system.

Can you jump-start a car with a bad starter? Most of the time, NO, you can`t jumpstart a car with a bad starter unless you repair it. When the battery is dead, jumper wires or boosters are employed. You use a second battery to provide the necessary electricity to start the car.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Interior lights work but car won’t start and power locks won’t work 97 Honda passport
ANSWER : You possibly have a dead battery. Batteries that are "partly" dead can often still run lights, dash lights and so forth but will not have enough power to run the starter motor and start the car. The very first thing to do is be sure you have a fully, 100% charged battery that passes a load test. If the battery passes a load test be sure it is NOT a marginal pass in which case you should simply install a new battery to reduce diagnostic headaches. Batteries are a VERY important component in a car’s electrical system. Once you have a fully functioning, preferably new battery (fully charged before you leave the store), if the starting system still does not function, there are only a relatively limited number of causes. Broadly, either the starter motor/solenoid assembly is faulty or the electrical circuit supplying the motor has a fault. That circuit begins at the battery and includes grounds, wiring (some of which is very heavy cabling), fuses, relays, the ignition switch and terminations. Basically, the starter is either getting power or it isn’t. If the starter motor is getting power but it doesn’t work, the starter is condemned and replaced. Alternatively, if there is no power to the starter, then the starter circuit is traced until the fault in the circuit is found. Notably, faults can include high resistances, due to corrosion, wire strand breaks, or loose terminals, which can only be diagnosed using a voltage drop test. If you desire that a certified mechanic resolve this promptly, please simply request a no start diagnostic and the responding mechanic will get it diagnosed and repaired for you, including installing a new battery if required. Please let us know if you have further concerns or questions as we are always here to help you.

Car won’t start. The check engine light, battery light, and oil change light are coming on. I tried jumping the car and nothing happened. Why won’t my car start?
ANSWER : Hi and thanks for contacting Your Mechanic. If sometimes your vehicle will start with the new alternator and sometimes it won’t, then there is a loose connection in your charging system. Check all of the wires to the alternator and to the battery. Make sure that the battery cables are clean and tight. Make sure that the wires to the starter are clean and tight. A loose ground to the ignition system will cause the vehicle to not crank over. Check all of the ground wires from the battery to the starter. Make sure that they are clean and tight. If you need further assistance troubleshooting your no start situation, then seek out a technician, such as one from Your Mechanic, that can assist you.

Change interior lights and now it won’t start.
ANSWER : Hi there. There is a short in the switch to the interior lights causing the fuse box to burn fuses and make the car not start up. If you need further assistance with your electrical system, then seek out a professional, such as one from Your Mechanic, to help you.

So I have a hyundai sonata se push to start. My car won’t turn on, power is working, I push tof start but it won’t crank. I don’t
ANSWER : Hi there. It sounds like you have a failed starter. However, without proper testing there is no way to be 100% sure. I suggest having the battery tested first with a digital battery tester that provides current voltage, cold cranking amps, and state of health. Also inspect for corrosion on the terminals and cables as this will cause excessive resistance and not allow proper voltage/amps to the starter. Other possible failures could be in the wiring harness, relay, fuses, or communication network. I suggest having a qualified technician perform an inspection to avoid replacing unnecessary parts. Your Mechanic has several available technicians that can assist you with a car does not start inspection.

My dash board don’t work my front light work when I change my light into high beam and my back window won’t go down
ANSWER : As unfortunate as it is, your vehicle would be considered flood damaged. Diagnosing electrical problems in a flood damaged vehicle is nearly impossible. This would take many hours or even days to determine which wiring harnesses and circuits have been affected. Then nearly all of the wiring under the dash would likely require replacement as well as many sensors and switches. On a BMW vehicle, the amount of wires and switches are likely more than that of a lower end vehicle. Due to the inefficiency in cost, you would likely be able to purchase another BMW like yours for less than what it would cost to fix your car. Many insurance companies would consider this type of damage to total out the vehicle unfortuantely.

Car won’t start and no light on the dashboar. Lights, radio, wiper, a/c working. 1994 Honda Civic
ANSWER : Hi there, I would first check for blown fuse(s) and any relays for the ignition and coils. The "smoke came out of the steering wheel" is alarming! You may have a burned out ignition switch, or damaged wiring in the steering column. The "cranks, but doesn’t start" sounds like there is no power to the coil and plugs. I recommend a engine not starting inspection performed by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, and give you an accurate assessment of damage and cost estimate for repairs.

Charging warning light comes on when i turn the key and try to start the car and the car want start but when someone tried to give
ANSWER : Hi there:

If you recently replaced your battery, the issue may be caused by a malfunctioning alternator or other electrical component that comprises the charging system on your Nissan Sentra. The best way to find out which item specifically is faulty, is to have a professional mobile mechanic complete a car is hard to start inspection. This will allow the mechanic to determine the precise source of what’s going on with your Sentra and recommend or complete the right repairs.

2012 equinox reduced power light engine light and traction light came on. Lost a lot of power got home and all light except engine
ANSWER : Your car has what is called a "safe mode" that will be engaged by the computer when it detects that something critical has gone wrong related to any of the major components in your engine chassis or power train. This may be related to a number of things, most of which should have been registered in the computer when the check engine light came on. I recommend having an expert from YourMechanic come to your location to inspect your check engine light and diagnose any codes registered by your vehicle’s computer.