We have a new battery, new alternator, new coil pk, new master fuse and the car still won’t hold power.
My son change the spark plugs on a 2005 chevy trailblazer, on Wed, fixed a belt somewhere and put in a new coil pk. The same day the truck lost power while driving. We got a new alternator and battery, and the car still wouldn't start so we got a new master fuse, still nothing…we cannot seem to find out what's wrong with it. Please help!
My car has 200000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Hi there. The only thing that I could think possible is causing your problem is that something may not have been correctly installed while your son was completing this maintenance. However, if your engine was difficult to start before this service, it’s possible there are different components that are damaged that simply didn’t resolve the issue. The only way of knowing what is going on with your Trailblazer would be to have one of our mobile mechanics in your area come to your location and complete a car is hard to start inspection.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
Problem Description
Electrical power may be lost to the interior of the vehicle due to a blown 125 amp fuse located at the under hood fuse box. This fuse can blow if jumper cables are connected incorrectly. Replacing the blown fuse will commonly correct this problem.
The average cost for Chevrolet Trailblazer Alternator Replacement is $328.
To 145 amp alternator.
The most common reasons a Chevrolet Trailblazer key won`t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.
Possible causes of a power failure could be either bad battery connections, a bad ignition switch, or a bad alternator. What you need to do is check your vehicle`s power sources.
This issue is related to the throttle position sensor, and can be caused by faulty wiring to the TPS, bad connection at the TPS, or a failed TPS. To correct this issue, the wiring harness, connector, and throttle position sensor must be inspected, tested, and/or replaced. The most common cause is a faulty TPS.
Flat or faulty car battery
A flat battery is the most common reason your car won`t start and can be caused by a number of things, such as lights being left on, something in the electrical system causing a battery drain, or even a faulty battery that won`t hold its charge.
When it comes to the vehicle not starting, and not having electrical power, always start by checking the battery. In your situation you can go remove the battery from the vehicle, and take it to have it tested. If it is bad, simply replace it and drive the care home.
Alternators come in both 6 volt positive and negative grounds and 12 volt negative ground versions, and are great upgrades to any classic to power the numerous electrical demands of today`s classics and will keep the battery charged.
When it comes to the vehicle not starting, and not having electrical power, always start by checking the battery. In your situation you can go remove the battery from the vehicle, and take it to have it tested. If it is bad, simply replace it and drive the care home.
The most likely issue is that a component is clogged. A clogged fuel filter is the most common reason, although a loss of power in your car could also indicate problems with the fuel pump or fuel line. Impurities or debris may be blocking the system, which causes the loss of power in a car.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
We have a new battery, new alternator, new coil pk, new master fuse and the car still won’t hold power.
ANSWER : Hi there. The only thing that I could think possible is causing your problem is that something may not have been correctly installed while your son was completing this maintenance. However, if your engine was difficult to start before this service, it’s possible there are different components that are damaged that simply didn’t resolve the issue. The only way of knowing what is going on with your Trailblazer would be to have one of our mobile mechanics in your area come to your location and complete a car is hard to start inspection.
Car not starting, replaced battery and alternator fuse but now inside fuses are blowing and still not starting
ANSWER : Hi there. It is quite possible that you have an exposed electrical wire or a short somewhere in the electrical system that is the root source of your starting issue. A fuse or relay will continue to break when the circuit is unable to complete. This is typically due to a wire that is pinched, frayed or a ground wire connection that is faulty. Due to the multiple possible sources of this problem, I would recommend having one of our experienced mobile mechanics come to your location to complete an electrical problems inspection, so they can determine the root source of this issue and recommend the right repairs.
my battery kept draining until i bought a new alternator and battery. i have tightened the belt on the alternator but it still die
ANSWER : Hi there. The best way to diagnose why a battery would constantly drain is to review it’s job and how it is recharged. The battery is responsible for powering all electrical systems until the vehicle is started. At this point, the alternator takes over and also continually charges the battery while the vehicle is in use. A battery will drain when one of two things occurs. First, a battery will drain if it is constantly in use; supplying power to an electrical component even if the key is not in the ignition. Second, the battery will eventually die if the battery is not being charged frequently. However, since this is happening every two days, my initial thought would be that some electrical component on your 86 Olds is continuing to draw power from the battery. This is known as a parasitic drain. The best way to determine the source of this battery issue is to have one of our professional mobile mechanics come to your location and complete a battery will not hold a charge inspection.
My car cranks but will not start. I try to do fix the car myself. I put new battery, new alternator, and new ignition coils.
ANSWER : Hi there. Check the spark plugs and see if they are worn or burned. If the plugs are good and they have a good spark, then the engine compression could be low causing a no start situation. If the spark plugs are not emitting a spark, then the crankshaft position sensor could have failed or disconnected. Check the crankshaft position sensor wiring harness and make sure that its plugged in. Check the sensor and make sure that its not broken or damaged. If you need further assistance with your engine not starting, then seek out a professional, such as one from Your Mechanic, to help you.
I have Chrysler 300c. Battery light came on, changed battery and alternator but power still getting drained and battery light still comes on.
ANSWER : Hi, thanks for writing in. This may be a sign of a failing starter relay. The starter relay is a small unit near the starter that directs power to the starter from the battery. When this fails, it may cause a clicking sound and will not allow the starter to engage the flywheel when you turn the key. I would suggest having a professional from YourMechanic come to your home to diagnose your starting issue to determine the solution to get you back on the road.
New battery and alternator but there is still no power in my 204 Xterra onve I turn it off.
ANSWER : Hi there. It sounds like you either have a defective alternator or there is another issue within the circuit for the charging system. I usually start by checking the output of the alternator. If it is not putting out the right voltage or amperage then it needs to be replaced. I would then check to see if the alternator is getting the correct signal to turn on. These would tell me if the output if correct. If the alternator is putting out the right voltage then the positive battery cable may have failed and may have high internal resistance. If you need to have this checked out, consider YourMechanic, as a certified mechanic can come to you to [diagnose why the vehicle is losing electrical power] https://www.yourmechanic.com/services/electric-problems-inspection
Water was spilled in the trunk which soaked the car battery. Car won’t start now. Does water destroy a car battery?
ANSWER : Hi, thanks for writing in about the concern with the BMW 320i. If the battery was submerged in water then it’s completely possible for the battery to short out and die. Your friend will need to have the battery replaced. Also be sure to get all of the water out of the trunk. Have a certified technician, like one from YourMechanic, help you guys out if you need assistance with replacing the battery. Good luck.
New battery, car still won’t start. Single click sounds, like a dead battery
ANSWER : It sounds like you may have a faulty starter solenoid. If you hear a clicking sound when turning the key, it is likely that your starter solenoid may be faulty. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. As electricity is supplied to the starter a small gear comes out and engages the flywheel to spin the engine over as you turn the key. When this fails, it may cause a clicking sound and will not allow the starter to engage the flywheel when you turn the key. I would recommend having a professional from YourMechanic come to your location to diagnose and inspect your vehicle.
