About how much would a timing chain kit cost for a 2008 Suzuki XLT, and where can i find/ order original parts?

About how much would a timing chain kit cost for a 2008 Suzuki XLT, and where can i find/ order original parts?
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Hi there. You can order parts and hire a mobile mechanic to install the timing chain kit on your 2008 Suzuki (as long as you live in our service area). However, if you’re looking for OEM parts, several online parts divisions of dealerships are popping up left and right online. Simply search online for Suzuki OEM Timing Chain Kit, and you’ll find the pricing available.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Replacing a timing chain will typically cost anywhere between $1,000 to $2,500 (parts and labor included.)
The average cost for a Suzuki XL-7 Timing Chain Tensioner Replacement is between $1,459 and $1,721. Labor costs are estimated between $1,001 and $1,262 while parts are priced between $459 and $459.
Replacing The Timing Chain

You`ll have to bite the bullet and pay around $400 and $1,000 for installing a new one. Even though it`s costly, it`s better than the DIY-style option due to the risks and exhausting difficulty. However, if you come to the auto shop too late, you might have to replace the whole engine.

Timing chain kit. The kits, which are specially adapted to each engine, contain all the relevant replacement parts such as chain, tensioner, guides, sprockets and gaskets.
A 2008 Suzuki XL7 can last between 200,000 and 300,000 miles—or more if properly maintained. Most drivers average between 12,000 and 15,000 miles each year. That means that your 2008 XL7 has a life expectancy of around 15 to 20 years if you drive it regularly.
Your car has a timing chain.
Timing belts must be replaced on a regular basis, but timing chains do not. There`s no reason to alter the timing chain unless it`s damaged, strained, or otherwise affected. If there is a problem with the timing chain, your car will most likely have one or more issues.
If the engine has been well-maintained then there really is no reason to install a new engine. This engine can last 100,000 more miles if it was well-maintained. If it hasn`t been well-maintained, then I would replace the engine instead of wasting time on the chains.
Cloyes Gear & Products Inc. earned the best new product award for its Variable Valve Timing (VVT) Chain Kits at the 2019 Automotive Aftermarket Product Expo (AAPEX). The company`s VVT Chain Kits won top honors in the hard parts category of the New Product Showcase at AAPEX.
Overall, it should take a qualified mechanic between 5 and 8 hours to replace the timing chain and all of the parts that go with it.
A broken timing chain will cause an engine to not start or fail while driving. If the belt is already broken, the engine won`t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves. The valves themselves will bend and potentially ruin the engine.
Suzuki XL7: Is it reliable? They`re not the best car in the class but, so long as they`re properly looked after, the Suzuki XL7 shouldn`t be any more unreliable than another. Personally I`d look at other 7-seat options like the Toyota RAV4, Subaru Tribeca, or Hyundai Santa Fe.
Timing chain problem

If you can hear a rattling noise coming from the engine, then the most likely cause is a problem with the timing chain. The main cause of this problem is poor servicing, which results in the tensioners sticking. Does the video below sound anything like your issue?

The XL7 has just one engine level, available on all models, a 3.6 liter 24-valve DOHC V6 engine, delivering 252 horsepower with 243 pound-feet of torque.
In May 2009, Suzuki halted production of the XL7 indefinitely due to low demand. Through May 10, 2009, CAMI Automotive had only produced four XL7s for Suzuki after producing more than 12,000 units the previous year.
The Average Cost to Replace a Timing Chain Is $659 to $1,867 Depending on if You Go to the Mechanic or DIY. These prices are based on national averages. Related repairs or maintenance may also be needed.
Fortunately, unlike rubber timing belts, timing chains are made to last the car`s lifetime so it is unlikely that you`ll need to get it changed.
Timing belts must be replaced on a regular basis, but timing chains do not. There`s no reason to alter the timing chain unless it`s damaged, strained, or otherwise affected. If there is a problem with the timing chain, your car will most likely have one or more issues.
The Average Cost to Replace a Timing Chain Is $659 to $1,867 Depending on if You Go to the Mechanic or DIY. These prices are based on national averages. Related repairs or maintenance may also be needed.
Timing chain replacement

The chains do not have a replacement interval specified by the manufacturer, but they often have to be replaced quite early because the weak chain has elongated (sometimes already between 60.000 and 80.000 km).

Overall, it should take a qualified mechanic between 5 and 8 hours to replace the timing chain and all of the parts that go with it.
Timing chain replacement

The chains do not have a replacement interval specified by the manufacturer, but they often have to be replaced quite early because the weak chain has elongated (sometimes already between 60.000 and 80.000 km).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

About how much would a timing chain kit cost for a 2008 Suzuki XLT, and where can i find/ order original parts?
ANSWER : Hi there. You can order parts and hire a mobile mechanic to install the timing chain kit on your 2008 Suzuki (as long as you live in our service area). However, if you’re looking for OEM parts, several online parts divisions of dealerships are popping up left and right online. Simply search online for Suzuki OEM Timing Chain Kit, and you’ll find the pricing available.

need a way to retain the timing chain
ANSWER : The best way to approach this unfortunately is by using a timing chain tool retainer/holder tool. You may consider having an expert from YourMechanic come to your home replace the timing chain.

Timing chain positioning
ANSWER : This system is a bit complex. I can give you some instructions, but I highly recommend getting a hold of a repair manual or purchasing a yearly subscription for just your vehicle from AllData. It is only $25 for a years subscription from AllData.

There are two separate sets of marks on this system. One set is for aligning the timing chain to the camshaft gears and the intermediate shaft gear. There will be marks on the chain that raps around the crankshaft gear as well. These marks will not line up after you turn the motor over.The other marks are on the inside of the camshaft gears and align with the cylinder head parting line. If you were to draw a ling through the center of both camshaft gears, they should line up with that imaginary line.

The crankshaft key way should be aligned with the mating face of the main bearing cap. You can confirm it is in the correct position by verifying the number one piston is at top dead center. If you have removed the balance shaft timing chain, these marks really need a visual diagram to understand where they should be aligned. Without a diagram I am not very confident it can be explained very clearly.

This may be difficult to to follow, so again I highly recommend purchasing a repair manual in digital form or a book. If you feel this is over your head, I recommend the following inspection to help you out. Timing chain replacement

Good luck! I hope I was able to help you.

How much does it cost to replace a timing belt for a 2008 Acura MDX?
ANSWER : Hi there. In order to provide you with an estimate, we need to you request a timing belt replacement quote for your 2008 Acura MDX by clicking this link. Once we receive the data we need to collect, we will send you a quote.

My 2010 Chevrolet Equinox has a timing chain replaced and I was wondering if the timing gear was part of this.
ANSWER : Hello. If they replaced the timing chain to begin with then they should have also replace the timing chain gears and the tensioners at the same time. If they did not replace all of these parts when then installed the timing chain then they did not do a good job of repairing the vehicle. If the tensioners continue to fail due to a lack of oil pressure then there are other issues with the engine. It may have a failing oil pump. If you need some help with this engine, consider YourMechanic, as a certified mechanic can come to you to [diagnose why the tensioners keep failing] https://www.yourmechanic.com/services/timing-chain-replacement

What would it cost to have the timing chain replaced on a 2002 Saab 93 SE
ANSWER : Hi there. In order to receive a price estimate for one of our mobile mechanics to come to your location and complete a timing chain replacement job on your Saab, we need to get a little more data from you. If you could, please click this link to the service page and then click the blue Get a Quote button on the page. Once we receive your information, we will assembly a price quote and send to you via email. Thanks for contacting our team today!

how much would it cost for a mechanic to replace a timing belt on a 2003 nissan altima?
ANSWER : Hi there. If you’d like to get a price estimate for a timing belt replacement, please click this link. Once you get to the service page, click the Get a Quote button and enter your vehicle and location information. Once we receive this information, we’ll send you a price quote. Thanks.

Id like to purchase a car but i want to know how much it would cost to get the timing belt fixed on the vehicle.
ANSWER : Hello. Unfortunately if the timing belt brakes it is not usually as simple as just installing a new one on this vehicle. Most of the time when the timing belt brakes on this engine the pistons will contact the valves bending them. This would require that the cylinder heads be removed and the head rebuilt so this would be quite an expense. It really then depends on how cheap you are getting the vehicle for.