3 part question. I have a 1994 chrysler lhs thats had the timing belt go out
I have a 1994 chrysler lhs thats had the timing belt go out. It was changed with the water pump 100k miles ago. What should i expect to pay for the repair in utah, is it worth it to fix(can the timing belt take out other parts when failing?), and is it a part a decent backyard mechanic could fix given time?
Thank you
Justin
My car has 177000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
The 3.5 ltr V6 is an interference engine. That means the valves and the pistons occupy the same space but at different times. The timing belt keeps the cams and crankshaft spinning in the proper time, so the valves and pistons do not occupy the same space at the same time. When the timing belt breaks, from the momentum of the engine internals spinning and valve spring pressure, the valves will slam closed and the pistons will hit them. In all likelihood, there will be multiple valves bent and possible piston damage. The easiest way to determine if there is any pistons damaged, is to remove the spark plugs and look down into each cylinder with a borescope to examine the pistons. If the pistons are not damaged, then a valve job would get the engine running again. However, it is typically more cost effective to replace the cylinder heads with remanufactured units. The extra cost for new heads will be outweighed by the labor and machining costs for your damaged heads. It’s kind of a wide window but expect costs to be between $2500-$5000.
As far as is it worth it to repair, that is a subjective opinion that you should answer. Is the car in overall good shape ? Has it been reliable ? Are there other issues that need to be addressed ? What is the value of the vehicle ? Check sites like Kelly Blue Book (kbb.com). If for example, the vehicle has a retail or trade in value of $3000, and it costs $5000 to repair and get running, it is still a $3000 vehicle. It’s worth does not increase by the repair amount.
As far as is it worth it to repair, that is a subjective opinion that you should answer. Is the car in overall good shape ? Has it been reliable ? Are there other issues that need to be addressed ? What is the value of the vehicle ? Check sites like Kelly Blue Book (kbb.com). If for example, the vehicle has a retail or trade in value of $3000, and it costs $5000 to repair and get running, it is still a $3000 vehicle. It’s worth does not increase by the repair amount.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
What is the MPG for a 1994 Chrysler LHS? The 1994 Chrysler LHS gets 16 mpg in the city and 24 mpg on the highway.
The new generation of the LHS was much more refined than its predecessor, and its 3.5 L SOHC 24-valve V6 produced 253 hp (189 kW; 257 PS) at 6400 rpm and 255 lb⋅ft (346 N⋅m) of torque at 3950 rpm. Chrysler discontinued the LHS after 2001, replacing it with the new Concorde Limited.
The Chrysler LHS was introduced in 1994, a year after the Concorde on a stretched LH body (the “LHS” name comes from LH-Stretched).
Fuel & MPG
272.0/408.0 mi. 17.0 gal.
Chrysler`s fuel consumption estimates are 12.4/7.8 L/100 km (city/highway) for V6/RWD models, and 12.8/8.7 L/100 km with AWD. V8-powered models are rated for 14.7/9.4 L/100 km with RWD, and 15.9/9.6 L/100 km for AWD models. One of the 300`s competitors is the closely related, but lower-price, Dodge Charger.
While Chrysler and Dodge are both part of the Fiat Chrysler Automobiles (FCA) umbrella, both Chrysler and Dodge are separate brands.
Who Makes Chrysler? Fiat Chrysler Automobiles N.V. is one of the three biggest U.S. car companies, alongside General Motors and Ford, and FCA is also simply known by its vehicles from the popular automake Chrysler. This company manufactures its own vehicles, including several other popular and reliable auto makes.
In mathematics, LHS is informal shorthand for the left-hand side of an equation. Similarly, RHS is the right-hand side. The two sides have the same value, expressed differently, since equality is symmetric.
Limehouse station, London, National Rail station code LHS.
The HEMTT A4 LHS moves equipment, ammunition and supplies on demountable cargo beds wherever the mission demands. Its 500 horsepower Caterpillar® C15 engine powers it over even the harshest terrain, allowing it to transport an 11-ton (9979 kg) payload in addition to towing an 11-ton (9979 kg) payload trailer.
LHS: 26,000 pounds (including flat rack)
Chrysler Pacifica Hybrid
If you`re looking for a fuel-efficient Chrysler, the Pacifica Hybrid is the one and only choice. With a combined 82 MPGe on electric and gas, and a mark of 30 MPG combined on gas alone, the Pacifica Hybrid is by far the best fuel-efficient option available.
The purpose of eco mode, or “economical mode,” is to improve your car`s fuel economy as you drive. You can switch eco mode on and off by simply pressing a button that you can find near the steering wheel.
The 300 mpg car that Volkswagen released was built with efficiency in mind. It drives off both electricity alone and off gasoline. The gas tank is much smaller than your average tank, holding only 2.6 gallons, so the fuel doesn`t age before it is used-the car was designed to travel 100 km off of 1 liter of diesel fuel.
Those numbers really tell a story. GM sold 1 million more cars than Chrysler and brought in $43 billion more in revenue. Ford sold 474,000 more vehicles than Chrysler and brought in $23 billion more in revenue. But Chrysler made $1 billion more in profit than GM and $4.8 billion more than Ford.
Fundamentals: Ford vs.
In terms of Profitability, GM is also ahead of Ford: GM`s EBIT Margin of 7.66% (compared to 4.85% for Ford) as well as its ROE of 14.06% (compared to Ford`s -4.69%) are significantly above its competitor, indicating that GM is the better buy for investors when it comes to Profitability.
Dodge`s parent company, Chrysler, decided to make RAM a stand-alone name for their pickup trucks in 2009. That`s why if you purchase a Dodge pickup truck at our Chrysler Dodge Jeep Ram dealership, there`s a distinction between models made before and after 2009.
Fiat Chrysler Automobiles N.V. (FCA) was an Italian-American multinational corporation primarily known as a manufacturer of automobiles, commercial vehicles, auto parts and production systems. The Italian holding company Exor was the largest shareholder and owner of voting rights.
The iconic four-door muscle car, otherwise known as the Chrysler 300C, has had a long history of using its distinctive niche in the luxury performance car market.
Dodge engines are manufactured by Chrysler (now referred to as FCA) and are made in Michigan, Detroit, and Mexico. Let`s dig into that a bit more. Dodge makes its engines at three main facilities: Dundee Engine Plant in Dundee, Michigan.
Examples of Solving Linear Equations
Step one: assume LHS is equal to RHS. Step two: Place the constant on RHS and the variable on the LHS. Step four: Put this value first in the initial equation on LHS and then on RHS. If both sides have the same answer, then LHS would be equal to RHS.
lhs refers to “left hand side”, indicating it is on the left side of the = operator, and rhs refers to the “right hand side”, similarly indicating that it is on the right of the = operator. The effect of the line lhs = rhs is to copy the value of rhs and store it in the memory associated with lhs .
Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC`s reset button is typically red and visible, so it should be easy to spot. If you don`t see a reset button on the outside, it could be located inside the unit behind the service panel.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
3 part question. I have a 1994 chrysler lhs thats had the timing belt go out
ANSWER : The 3.5 ltr V6 is an interference engine. That means the valves and the pistons occupy the same space but at different times. The timing belt keeps the cams and crankshaft spinning in the proper time, so the valves and pistons do not occupy the same space at the same time. When the timing belt breaks, from the momentum of the engine internals spinning and valve spring pressure, the valves will slam closed and the pistons will hit them. In all likelihood, there will be multiple valves bent and possible piston damage. The easiest way to determine if there is any pistons damaged, is to remove the spark plugs and look down into each cylinder with a borescope to examine the pistons. If the pistons are not damaged, then a valve job would get the engine running again. However, it is typically more cost effective to replace the cylinder heads with remanufactured units. The extra cost for new heads will be outweighed by the labor and machining costs for your damaged heads. It’s kind of a wide window but expect costs to be between $2500-$5000.
As far as is it worth it to repair, that is a subjective opinion that you should answer. Is the car in overall good shape ? Has it been reliable ? Are there other issues that need to be addressed ? What is the value of the vehicle ? Check sites like Kelly Blue Book (kbb.com). If for example, the vehicle has a retail or trade in value of $3000, and it costs $5000 to repair and get running, it is still a $3000 vehicle. It’s worth does not increase by the repair amount.
As far as is it worth it to repair, that is a subjective opinion that you should answer. Is the car in overall good shape ? Has it been reliable ? Are there other issues that need to be addressed ? What is the value of the vehicle ? Check sites like Kelly Blue Book (kbb.com). If for example, the vehicle has a retail or trade in value of $3000, and it costs $5000 to repair and get running, it is still a $3000 vehicle. It’s worth does not increase by the repair amount.
Timing belt is tight and yet appears to be slipping several teeth when belt is rotated,
ANSWER : This is okay since there are more notches on the belt than the amount on the sprockets. Once you aligned the first time the belt marks will almost never line up perfectly again. The marks are used to put the belt on correctly. They aren’t used as an indicator after the engine is turned again. You should be okay to start the motor as long as timing marks on pulleys line up. If you run into any issues, have a certified technician, like one from YourMechanic, assist you with the replacement of the timing belt.
timing belt and driving belt replacement interval
ANSWER : The timing belt should be checked every 24 months or 30K miles and replaced every 48 months or 60k miles. You are not due until 173k for a timing belt replacement, but should get inspected at 143k. The accessory belts should be inspected at every oil change and replaced as needed.
Timing Belt Cover replacement and External Belt too.
ANSWER : The parts are touching likely because either the parts were not installed properly or fasteners may be missing or broken. If oil has been leaking, this can cause the seal around the covers to swell as well causing misalignment. Consider hiring an experienced technician like one from YourMechanic who can come out and take a closer inspection of the belt drive to see what is causing the misalignment and offer a more personal diagnosis as well as estimate the proper repairs.
1992 Acura Legend, when the timing belt goes, is it common for the valves to bend?
ANSWER : If the timing belt break off, the engine’s pistons will hit the valves as the pistons are moving. The engine is an interference engine and can cause damage to the internals of the engine. The last time the belt came off, the engine may have been running at an idle or not under power. It is possible for the valves to be bent. What I recommend doing is performing a leak down test on the engine with a timing belt on the engine and properly timed to determine if the valves were in fact bent. If all of the cylinders have a 80 percent hold and not leaking, then the engine is fine. If there is a mass leak on a cylinder, then the piston did some internal damage. I recommend seeking out a professional, such as one from Your Mechanic, to help you check your engine’s valve train with a leak down tester.
______________________________________________________
Billing and parts question was sent to CS for the cost of parts and labor for valve train and related parts from a broken timing belt for a 1992 Acura Legend with a V6-3.2L engine.
hi- i got an estimate to replace my timing belt and water pump for my 2012 pilot. Do these figures seem right? Timing belt (35.00)
ANSWER : Hi there. That is a fairly good and detailed estimate for this type of service. It also falls within the price estimation to have a mechanic shop complete this service. However, you might want to consider a third option, of having a professional mobile mechanic come to your location and complete the timing belt replacement and water pump replacement. Simply click the blue links to receive an estimate for both services.
hey i had a belt break while traveling on my 2004 honda pilot. It is the small belt and not the serpentine belt. The mechanic t
ANSWER : Hello. The smaller belt is known as your timing belt, and it works inside the engine to keep mechanical components aligned with each other during the compression cycle. The serpentine belt, which is the big belt, drives the alternator, water pump, AC compressor, and a couple of other components. If the small belt broke it is likely the timing belt. This will cause the car to stall, lights to illuminate, and can even cause serious damage to the engine. Typically replacing a timing belt is a lot more complicated and expensive than replacing a serpentine belt. You may want to receive a second opinion on the car before you go ahead with repairs.
Serpentine belt tearing apart by pebble & pieces of it getting inside timing belt, motor destroyed
ANSWER : Hi there. I agree with you – this doesn’t pass the ’smell test’. The only way for debris to enter the engine is through the throttle body. Since the throttle body inlet is protected and covered by an air intake on your Ford Fiesta, I highly doubt that this is the source of your problems.
